4 - The PatchMix DSP Mixer
Mixer Strip Creation
48
Creative Professional
Level, Pan, Solo & Mute Controls
The
Pan
control comes before the Level Control
and Aux Sends in the signal flow. On stereo strips
we use an unconventional pan section with two
pan pots – one for the left part of the signal and
one for the right part of the signal. This feature
allows you to independently position both sides of
the stereo signal. A conventional stereo balance
control only allows you to turn down one side or
the other.
The
Mute
button does just what you would
expect—press the button and the sound from that
channel is cut off. Pressing the Solo button while
the Mute button is pressed allows you to hear the
channel until solo is turned off.
The
Solo
button allows you to listen to only that
channel while muting the rest of the mixer’s
output. If multiple solo buttons are pressed, you
will hear all soloed channels and the non-soloed
channels will all be muted.
The mute status is remembered if a muted channel
is soloed. When the channel solo is turned off, the
channel reverts to being muted.
The
Level Control
for the strip is an attenuation
control that can also provide up to +12dB of gain.
0db is the unity gain setting. You can also type
numeric values into the displays to set the level.
At the very bottom is the
Scribble Strip
text area,
into which you can type any short piece of text,
thus naming the strip, i.e. “vocals”, “bass”,
“drums” and so on.
Level Control
Pan Controls
Mute & Solo
Buttons
Aux Send
Amount
Controls
Scribble Strip
Summary of Contents for 1212M
