4 - The PatchMix DSP Mixer
Main Section
52
Creative Professional
Input
Selecting the
Input
display view shows a graphic representation of the PatchMix DSP
Mixer inputs. This screen is only a display, unlike the Effects and Outputs screens,
which allow you to make routing changes. Input routing changes are made by adding
mixer strips.
See “Mixer Strip Creation”
.
The Input and Output
displays make it much
easier to understand the
signal routings of a
complex mixer setup.
The input routings are divided into two categories: Physical Inputs and Host Inputs.
Select either category by clicking on the Physical or Host button.
Tip:
Clicking on any
of the input routings in
the TV display highlights
the corresponding mixer
strip.
Physical Input Display
Host Input Display
Output
Selecting the
Output
display view shows a graphic representation of the PatchMix DSP
Mixer outputs. The output routings are divided into two categories: Physical Outputs
and Host Outputs. Select either category by clicking on the Physical or Host button.
Physical Output Display
Host Output Display
The Host Output display shows all the Insert Routings in addition to the Main Mix and Monitor
out routings. Click on the desired row to make or break a physical output connection.
The
Physical Output
screen displays and allows you to connect the Main and Monitor
outputs of the mixer to “physical” analog or digital outputs. Click on the box in the mix
or monitor area to make (or break) a connection.
The
Host Output
screen displays and allows you to view the Host (ASIO or WAVE)
outputs of the mixer. See
“Insert Section”
for information on how to connect the
inserts.
