MK-6 Operation Manual
93
MIDI Menu
Most of the parameters in MK-6 that relate to MIDI are contained within
this menu. You can merge MIDI data, change the continuous controller
assignments, turn program changes off or on, and lots more.
MIDI menu settings are saved with the current Multimap.
To enable the MIDI menu:
Press the MIDI button, lighting the LED. The MIDI Menu screen displays
the menu page most recently selected since powering up MK-6. The cursor
appears below the first character of the screen heading on line one.
_
_
_
_
Warning:
MIDI Menu
changes are automatically
saved when you exit the menu.
If the power is turned off before
you exit the menu any changes
you have made will be lost.
To select a new screen:
Press the Home/Enter button or press the Cursor button repeatedly until
the cursor is below the screen title heading. Rotate the data entry control to
select another screen.
To modify a parameter:
Press either Cursor button repeatedly (or hold down the right cursor button
while turning the data entry control) until the cursor is below the desired
parameter value. Rotate the data entry control to change the value.
To return to the previously selected Mode/View screen:
Press the MIDI button, turning off the LED.
