28
E-mu Systems
Basic Operations
Main Screen
Channel Pan
Channel Pan sets the stereo position of the selected MIDI channel. This
control operates like the balance control on your home stereo system.
Channel Pan is the same parameter as MIDI pan controller #10, and
changes made over MIDI are shown in the display.
Note:
Pan settings in the preset ADD algebraically with the Channel Pan
setting. Therefore, if the pan setting in the preset were set to “63
R
,” moving
the Channel Pan setting full left would return the sound to the center
position.
þ
To Change the Channel Pan
1.
Press either cursor key until the cursor is underneath the pan field.
2.
Rotate the Data Entry Control to select a pan value. 64
L
indicates a hard
left pan, 63
R
indicates a hard right pan. With a setting of “00,” the
sound is centered in the stereo field.
032
2
bas: Interference
C01A Vol127 Pan01
R
USER
Pan Position
