OMT Series Reader OMT601
www.e-omnitech.com
sales@e-omnitech.com
6. Support Mifare I compatible IC cards;
7. Built-in LED and buzzer.
8 Data in the IC card’s can be output in decimal or duodecimal
9
.
Windows98, 2000 and XP program has USB drive itself.
1.3 Connection of OMT601 and Usage
The interface for this reader is USB2.0 HID, just plug in on your PC,
the system will automatically install the program, and in other words,
this reader is driver-free.
After connect OMT601 with PC, the indicator show green, during
this time, OMT601 are doing initializing USB interface and reading the
chip. 1 second later, the beeper will beep and the indicator will change
red and keep the red state, which means the initialization is successful,
and the user can read the card now.
When the reader enter into reading card state, you need to open
the folder or program the card number will be input, and put your
c
ursor
into the place the card number will be output. When reading card, the
indicator will turn green and meanwhile the beep will beep for 0.5
second. If the indicator back to red means this operation successful.
Now, if you don’t take away the card from the induced area, the reader
will not read its number again.
