SHANGHAI ESURVEY GNSS CO., LTD
.
38
3.3 Set the Virtual Serial Port
To set the virtual serial port, do the following:
1. Run
USR-VCOM
software.
2. Click
, and set the following in
Add Virtual Serial Port
dialog box for the
virtual port for vessel control, GNSS receiver, and echosounder:
NOTE:
You can freely choose the serial port number for both 2.4G network
and 4G network as long as the serial port is not occupied. It is recommended
to choose the larger number.
o
If you use 2.4G network, set as follows:
NOTE:
When setting the remote port, please check the information
on the sticker on the vessel control unit.
o
If you use 4G network, set as follows:
Summary of Contents for VE115
