20
21
❙
STEP 1
CHOOSING THE BEST TIME TO USE THE
If your previous hair removal method was:
Razor:
You can use
immediately.
Depilatory creams:
You should only use
1 week after your last depila-
tory cream treatment.
Waxing, electric epilator, tweezers:
You should only use
3 weeks after your last depila-
tion treatment.
Laser technology, flash lamp or other method:
You should only use
after hair re-growth has
started.
❙
STEP 2
PREPARE YOUR SKIN
• Your skin should be clean, dry and free of any cosmetic
product.
• Do not apply any cream, moisturiser, oil or any other
substance on your skin.
• Shave the area to be flashed on
the same day
of the
session with
.
NOTE:
It is imperative that the areas of the skin to be
flashed are completely free of all hair by shaving (and
not by waxing, depilation cream, electric epilator or by
any other hair removal procedure). Shaving must be
done preferably on damp skin in order to reduce the
aggressive effect of the razor.
• Rinse your skin with water. After shaving, the skin should be
thoroughly rinsed to remove all the hairs that have been cut.
❙
STEP 3
USING OF THE ACTIVATION CARD
These devices operate with an activation card, credited with 3000 flashes.
This card is specific to the
optic
cartridge with which it has been ordered.
- Use the activation card of your
optic
cartridge.
- Insert the card on the upper support clip located in the base of the applicator.
- Leave the card in this slot throughout the entire hair removal session.
- At the end of the session, remove the activation card, take care not to damage it, and store it in its case.
- Follow the procedure to switch off the device.
REMOVING HAIR WITH
