50
The
mask
glasses must be worn by all persons who are present
when flashes are administered. They form a boundary to the
area where the application of flash treatment is prohibited (e.g.
eyelashes, eyebrows, etc.)
USING THE ACCESSORIES
The
pen
is used to mark out the area to be depilated. The work
pencil must be used before the
gel
is applied.
IMPORTANT NOTE:
Only the
pen
pencil must be used to mark
out the areas which are to receive flash treatment. It has been
tested for the absence of reaction to flashes. Any other pencil
may cause skin burns when the flash is applied to the line drawn
on the skin.
The
gel
used for flash treatment must be stored at ambient
temperature. It is used in a thick layer, and is applied
progressively as the session proceeds, in order to prevent
drying-out on the skin. Once
gel
has been applied to the
skin and exposed to flash treatment it must not, under any
circumstances, be recovered and applied to another zone.
Repeated exposure to flash treatment is liable to
change its optical characteristics. At the end of the
session, it must be removed from the surface of
the skin using a damp towel, or under the shower.
Remove
gel
from the optical parts of the mobile
head of the applicator using a damp towel, then
apply the
clean
spray.
Ingredients (quantity w/v%): carbomer (0,5-2), TriEtanol Amin (0,5-
2), MonoPropylene Glycol (0,5-2), Dimethicone Copolyol (0,1-1,0),
Isopropyl Myristate (0,1-0,8), Diazolidinyl Urea (0,1-0,8), Glycerin
(1,0-5,0), Aloe Vera barbadensis (0,2-1,0), Benzyl alcohol (and)
Methylchloroisothiazoline (and) Methylisothiazolinone (0,05 – 0,15),
Deionized water (Q.S 100).For external use only. Not to be used on
broken, burned or infected skin. Keep out of reach of children.
The
stop
plate is constructed of a flash-resistant material. It is
used to mask an area where flash treatment is not to be applied
(for example, tattoos). The glass end of the applicator (optical guide)
may also be positioned to overlap the
stop
plate and the skin.
MASK
PeN
GeL
STOP
Made in China
Made in China
Made in France
Made in Euro
All these products can be found on our website at www.e-swin.com
or from your authorised distributor.
OPTIC
The
optic
cartridge has a pre-programmed
service life, which guarantees a consistent
quality of light emissions, from the first to
the last available flash. It is supplied with
its associated activation card. The
optic
cartridge and its activation card must be
replaced when the number of flashes has
been exhausted.
Made in France
Summary of Contents for WE-O
