background image

8

COMPATIBILITY CRITERIA 

Do not use 

 on persons who are unsuitable for depilation or collagen stimulation by pulsed light, and specifically those who fulfil 

one of the following criteria:

•  To pregnant women.

•  On very dark or black skins.

•  On injured, burned or infected skin.

•  On sun-burned skin which has healed within the last month.

•  In case of a previous history of sunlight allergy.

•  On skin which has been exposed to high-pressure UV within the last ten days.

•  In case of the use of a self-tanning agent (cream or food supplement) within the last 2 weeks.

•  On skin lesions of unusual appearance – your practitioner should be consulted beforehand.

•  On high-risk areas (blemishes, birthmarks, warts, unhealed wounds, etc.).

•  On moles: if these are located within the zone to be depilated, they must be concealed beforehand, e.g. by covering with the self-

adhesive 

Patches

 supplied with 

.

•  On tattooed areas: permanent make-up (for example, lip tattoos) or cosmetic tattoos, of whatever colour. In this case, use the 

Stop

 

delimitation plate supplied with your 

.

•  Persons suffering from skin conditions (eczema, inflammations, acne, etc.).

•  Persons undergoing photo-sensitizing treatment (a medical opinion must be sought).

•  In case of a previous history of cutaneous pathology.

•  Diabetics, haemophiliacs epileptics, persons suffering from late onset cutaneous porphyria.

•  Persons wearing a pace-maker or cardiac defibrillator.

•  On animals.

•  For the treatment of white or red hair. More specifically, some people are born with phototype I red (“redheads”). In adulthood, these 

persons may have lost this fundamentally orange colour. However, the melanin structure of these hairs retains characteristics which 
render light technologies ineffective for depilation.

IMPORTANT:

 The treatment professional must ensure that only persons who fulfil the criteria for application described in 

the present manual receive depilation or collagen stimulation treatment using 

.

USAGE       PRECAUTIONS

Summary of Contents for WE-O

































































Reviews: