13
Pin
Cross
section
Name
Description
61 24-16AWG
Output 02
High side, low side, low side PWM, half-bridge, full bridge, soft start
(1) (2)
62 24-16AWG
Output 01
High side, low side, low side PWM, half-bridge, full bridge, soft start
(1) (2)
(1) PWM, half and full bridge only possible via ECU slaving.
(2) H-bridge control only with neighbouring output pairs (1+2, 3+4, 5+6, 7+8, 9+10).
(3) Calibration for waking the module with high signal. Dedicated wake pin is always active.
The SCS3000-16 is protected against false polarization at the main connection and load outputs.
4.2.3 Dimensions of the SCS3000-34 and SCS3000-48
Figure 5: Dimensions of the SCS3000-34 and SCS3000-48
4.2.4 Pin assignment SCS3000-34
The following table shows the SCS3000-34 pin assignment.
Ampacity of outputs:
10 x 40 A high side / low side, 5 H-bridges, PWM 20 kHz
10 x 35 A high side
14 x 12 A high side
Supply pin
Mating plug: Surlok SLPPC...BSR0 (... = size: 50 = 200 A, 70 = 250 A, 85 = 300/350 A)
Pin
Cross
section
Name
Description
1
–
+ Supply
B
Plug 1
Mating plug: TE 1-1534127-1, cap: 9-1394050-1
Pin
Cross sec-
tion
Name
Description
1
20-12AWG
Power ground
Battery -
2
20-12AWG
Output 20
High side 35 A
130
56.55
25.65
10
210
115
114.25
189.90
4xM4
49.2
42.5
27
49.65
25.65
10
86.4
