58
8.3.5.4 Minimum activation time
This example (figure 25) shows the use of a flip-flop in combination with a delay to extend an input signal so that a minimum
switch-on time is guaranteed.
8.3.5.5 Grayhill keypad
This example (figure 26) shows how to connect a Grayhill keypad with a LED key colour that changes depending on the initial state.
8.3.6 Communication settings
Settings for bus communication can be made under »Cal«, »Communications«. In addition to user-defined CAN settings, soft I/O
addresses can also be defined here.
Figure 25: Minimum activation time
Figure 26: Grayhill keypad connection
Figure 27: Communication settings
