6
4 Hardware options
There are two main versions of the SCS200 which superficially can be distinguished by
the version of switching elements installed.The two versions are the semi-conductor
version and the relay version, which are described in more detail in the following.
All versions of the SCS200 are pin-compatible and have the same housing footprint
to allow ease of replacement.
4.1 Semi-conductor version SCS200-SC…
The semi-conductor version SCS200-SC... of the SCS200 intelligent power distribution
system switches loads via HSD power semi-conductors. The module receives its
commands via the CAN bus. Internal current measurement allows an electronic load
protection in addition to the signal of the present load current via CAN bus. In the event
of an overload, the channel will be switched off automatically. Via a CAN message, the
channel can be switched on again remotely.
The voltage values of the six analog inputs of the device can be read via CAN messages.
A wake pin allows waking the module via the hardware from the sleep mode. The fully
electronic version in an IP66 / IP67 enclosure is available for 12 VDC both with 8 or
12 load outputs.
4.1.1 Dimensions SCS200-SC…
21.3
14
43.8
23.8
18.8
13.3
159
114
142
11
159
142
22
22
54
21 pole socket,
suitable connector:
AMP LEAVYSEAL
part no. 1-1534127-1
M6
T
max
=4 Nm
M8
T
max
=8 Nm
ø6.4±0.2
(4x) for screw
M6. T=6 Nm
G
E
R
M
A
N
Y
SCS
®
200
fig. 2: Dimensions SCS200-SC…