17
Auxiliary relay modes.
Courtesy light mode.
Basic operating
features
With courtesy light mode selected, the auxiliary light will switch on as the gate begins opening and remain on for the programmed light on time after
the gate has closed.
The auxiliary relay can also be triggered to switch on without the gate opening by simply pressing and releasing any remote button programmed into
the auxiliary relay function of the receiver.
The relay on time for the two different triggers can be programmed to different on times if wanted.
Below is an example of courtesy light mode when standard BT mode is active.
Action
Response
Momentary BT trigger.
Auxiliary relay
activates.
No buzzer tone.
Gate begins
opening.
Gate reaches open
position.
Gate stops.
No buzzer tone.
Momentary BT trigger.
Gate begins
closing.
No buzzer tone.
At full closed position.
Gate stops.
No buzzer tone.
Relay on timer
begins counting
down.
After relay on timer
timeout.
Auxiliary relay
deactivates.
No buzzer tone.
If the gate is closed and any remote button programmed into the auxiliary relay function is pressed momentarily,
the following will occur.
Auxiliary relay status
Action
Response
Momentary
auxiliary relay
trigger.
Auxiliary relay
switches on for
programmed
time.
No buzzer tone.
Momentary
auxiliary relay
trigger.
Auxiliary relay
switches off.
No buzzer tone.
ON
Com
N/O
N/C
3 Min.
0
0
0 sec.
c.
OFF
Com
N/O
N/C
0
1 hour.
OFF
Com
N/O
N/C
OFF
Com
N/O
N/C
ON
Com
N/O
N/C
ON
Com
N/O
N/C
Gate closed.
