9
“BT” Button triggers.
Simple auto-close mode.
Basic operating
features
The BT functions are the primary full gate opening functions for motor vehicle access.
There are two ways of activating the “BT” functions on this control card. Either via the hardwired BT input or the BT receiver channel.
Simple auto-close mode functions exactly the same as standard mode except that the gates will close automatically after the programmed BT au
-
to-close timer has timed out.
In this mode you have access to the following advanced features: - Holiday lock-out and Party mode.
NB!
For any auto-close feature to work, a pair of safety infra-red beams must be installed and functioning correctly. If no safety infra-red beams are
installed then the gates will open but not close again.
Action
Response
Momentary BT trigger.
Gate begins
opening.
No buzzer tones.
At full open position.
Gate stops.
No buzzer tones.
Momentary BT trigger
or auto-close timer
timeout. Safety beam
input not triggered.
Gate begins
closing.
No buzzer tones.
Momentary BT trigger.
Gate stops and
immediately
starts opening
again.
No buzzer tones.
Momentary BT trigger.
Gate stops.
No buzzer tones.
Momentary BT trigger
or auto-close timer
timeout. Safety beam
input not triggered.
Gate begins
closing.
No buzzer tones.
At full closed position.
Gate stops.
No buzzer tones.
STOP
0
20 sec.
0
20 sec.
Gate closed.
