Ver: 2015.001
12
Basic operations.
“PED” Pedestrian trigger.
The PED trigger is a higher security option and is used when access to or from the property is limited to exclude motor vehicles.
Pedestrian mode makes use of a mandatory auto-close timer that prevents the gate from being left open after each transaction.
There are two ways of activating the “PED” functions on this control card. Either via the hardwired PED input or the PED receiver
channel.
NB! For any auto-close feature to work, a pair of safety infra-red beams must be installed and functioning correctly. If no safety
infra-red beams are installed then the gate will open but not close again.
Gates in the closed position
Action
Response
Momentary PED trigger.
Gates remain closed.
Wait for warning tones to
finish.
Gate 1 begins opening.
No buzzer
tones.
At preprogramed
pedestrian open position.
Gate stops.
No buzzer
tones.
Pedestrian auto-close
timer times out.
Gate remains at
pedestrian opening.
Wait for warning tones to
finish.
Gate begins closing.
No buzzer
tones.
Momentary PED trigger.
Gate stops and
immediately begins
opening.
No buzzer
tones.
At full open position.
Gates stop.
No buzzer
tones.
Auto-close timer times
out.
Gate remains at
pedestrian opening.
Wait for warning tones to
finish.
Gate begins closing.
No buzzer
tones.
At full closed position.
Gate stops.
No buzzer
tones.
