Ver: 2015.001
13
Basic operations.
“LPT” Loop detector trigger input.
The Loop trigger mode is exactly the same as Condominium auto-close mode.
The only way to trigger loop detector mode is via the hardwired LPT input.
In Loop detector mode, a LPT trigger is treated as open, and any BT or LPT trigger is treated as a keep opening, keep open triggers or
re-open trigger while the gates are running. The gates will only close once the LPT auto-close timer has timed out.
NB! For any auto-close feature to work, a pair of safety infra-red beams must be installed and functioning correctly. If no safety
infra-red beams are installed then the gates will open but not close again.
Gates in the closed position
Action
Response
Any LPT trigger.
Gates begin
opening.
No buzzer tones.
Any LPT trigger.
Gates continue
opening.
No buzzer tones.
At full open position.
Gates stop.
No buzzer tones.
LPT auto-close timer times out.
(Any BT, LPT or safety beam
trigger while the timer is
counting down, resets the
timer)
Gates begin
closing.
No buzzer tones.
Any LPT trigger.
Gates stop
closing and begin
opening
immediately.
No buzzer tones.
At full open position.
Gates stop.
No buzzer tones.
LPT auto-close timer times out.
(Any BT, LPT or safety beam
trigger while the timer is
counting down, resets the
timer)
Gates begin
closing.
No buzzer tones.
At full closed position.
Gates stop.
No buzzer tones.
