E-Tech IP-100 User Manual Download

Page: 7 / 20

FILE: IP 100 Service manual.doc 2004.05.01

E-TECH Co., Ltd 5/19

4-1 Features & Operation

1. Monitor

Press the Monitor key momentarily to disable the Tone squelch.

2. Radio Call

By using Various 5Tone, individual / Group call is available.

16 Receiving codes are available as well as open call.

3. Missed calls list

16 Missed calls can be listed. If a call remains unanswered, the call will be stored

by the radio.

4. contact list

During a call, the contact list may be used to give access to up to 16 preprogrammed

numbers accessed via the menu.

5. status list

A status is a code for transmitting prearranged messages, e.g. status “05” may indicate

“launch”. Status list contains up to 30 entries.

6. Channel : 255 channel

7. Scan ON/off

8. Power level : Power level is adjustable in each channel respectively.

9. Talkaround on/off

10. Emergency :

11. Lone Worker

12. Tx Tone select : In the menu, tx dcs /ctcss tone is adjustable.

13. Rx Tone select : In the menu, rx dcs /ctcss tone is adjustable.

14. Group : Defines group tone. You can select tone code for group, and it is used as a default value

. 0~9 and a, b, c, d available. And “A” is used as a basic value..

15. BEEP ON/OFF : BEEP sound ON/OFF.

16. KEY LOCK : LOCK/UNLOCK Button KEY.

17. SQUELCH : Squelch level is adjustable

18. AUTO SQUELCH : Squelch level is adjustable automatically by surroundings.

19. DTMF ON/OFF : DTMF function is available.

20. VOX : VOX LEVEL is adjustable by pushing up and down button.

21. AUTO VOX : VOX level is adjustable automatically by surroundings.

22. P - SCAN : Priority Scan

23. POWER SAVE : Power save mode is available.

24. PASS WORD : This function is useful for security reason.

25. LOCATION INDICATE : Indicate where the radio is located by blinking green light every 7 seconds.

26. SCRMABLE : Internal Voice Scrambler is available.

27. STUN / UNSTUN : For added security and to avoid abuse of the radio system in which you operate

a feature known as Stun/Unstun is included in your radio.

28. BACKLIGHT : Lamp is lighting when you check LCD status.

Summary of Contents for IP-100





















Search results

Summary of Contents for IP-100

Reviews:

Related manuals for IP-100

Brands by name

Popular brands

E-Tech IP-100, User Manual

Search results

Summary of Contents for IP-100

Reviews:

Related manuals for IP-100

Brands by name

Popular brands