27
APPROVAL
1. FCC APPROVAL
FCC ID
Safety Traning Information
Your FM Handheld Transceiver generates RF eletromagnetic energy
during transmit mode.
This radio is designed for and classified as "Controlled Exposure /
Occupation Environment", meaning it must be used only during the
course of employment by individuals aware of the hazards, and the
ways to minimize such hazards.
This radio is NOT intended for use by the "General Population /
Uncontrolled Environment.
This radio complies with FCC RF radiation exposure limits set forth
for a controlled environment.
This radio should be installed and operated with a minimum distance
of 2.5 centimeters between the radio and your body. Therefore, to
ensure that your exposure to RF electromagnetic energy is within the
FCC allowable limits for occupational use, always follow below
information.
Do not operate the radio without a proper antenna as this may
damage the radio and may also cause you to exceed FCC RF
exposure limits. A proper antenna is the antenna supplied with this
radio by the manufacturer for use with this radio.
Do not transmit for more than 50% of total radio use time("50% duty
cycle"). Transmitting more than 50% of the time can cause FCC RF
exposure compliance requirements to be exceeded.
Always use E-Tech supplied accessories (antenna, batteries, belt
clips, speaker/mic etc.)
Use of unauthorized accessories can cause the FCC RF exposure
Summary of Contents for IP - Series
Page 1: ...1 Professional Radio IP Series User Guide...
Page 2: ...2 ITEMS...
Page 7: ...7 Menu Navigation Chart...
