E-Tech VPPH01 Manual
5
4.0 Configuration
4.1 Phone Keypad set
(Note: Default password is 1234.)
1. Function Keys Introduction
:
While using keypad and LCD to configure the setting of IP phone, following keys will be used:
Press key Function
Spk /Hand free Enter into submenu of the current menu ;Acknowledge to modification
Scroll menu forward
Volume/- Scroll menu backward
Local IP Enter into modification status
Redial Cancel current setting ; restore to its father catalogue
Back Space Backspace during the setting
Number keypad Input updating content according to require. Please see
appendix for character represented by each key
2. Configuration operation:
•
Enter setting mode: use the dial pad to enter the password of the phone (when debug is not
set as 0[disable], default password is 1234; when debug is set as 0[disable], please use super password 19750407),
and then press # , till password: is displayed. Then enter the password again and press Spk to let the phone enter
setting mode.
•
We take enabling eTalk prepaid card and setting the ID and pin as an example to explain
how to change setting:
Enter setting mode
Use the keypad to input the password of the phone (when debug is not set as 0[disable], default password is 1234;
when debug is set as 0[disable], please use super password 19750407), and then press #, till password is displayed.
Then enter the password again and press Spk to let the phone enter setting mode.
Enable eTalk
Once the phone enter setting mode, Network settings will be seen, then press Vol/+ to turn over the menu, until
protocol settings is displayed. Please press Spk to enter submenu and then continually press Vol/+ to turn over the
menu until Servicetype 0 [Normal] is displayed on the screen. Please press Local IP to enter change mode, then you
will see a cursor flashing at the beginning of the second line. It indicates that you can change the setting of this item.
Then press 2 to enable eTalk and then press Spk to confirm.
Set eTalk account (0117ETNS)
press Vol/+ to turn over the menu , once account is displayed on the screen, please press Local IP to enter change
mode, then you will see a cursor flashing at the beginning of the second line. It indicates that you can change the
setting of this item. Then press 0117 keys once respectively, 3 key thrice, 8 key twice, 6 key thrice and 7 key quintic.
Then press Spk to confirm. After above operation, the account 0117ETNS will be displayed on the LCD.
Set eTalk pin (409466193597)
press Vol/+ to turn over the menu, once pin is displayed on the screen, please press Local IP to enter change mode,
then you will see a cursor flashing at the beginning of the second line. It indicates that you can change the setting of
this item. Then press 409466193597 keys once respectively to input the password, and then press Spk to confirm.
After above operation, pin 409466193597 will be displayed on the LCD.
