E-Tech VPPH01 Manual
6
Save setting and exit setting
continually press Redial to reach save setting menu. Then please press Spk key to confirm the change. When the
menu (Save, are u sure?) is displayed on the LCD, press Spk again to confirm. Once the IP phone restart
successfully, the new setting is effective.
•
Appendix
The following chart indicates the digital letter and mark according to the times the corresponding character key is
pressed in the setting mode. Press key Press once
4.2 Configured by WEB
On a PC connecting with the phone or at the same segment of the phone, double click the Internet Explorer icon to
open the IE browser. Input the IP address of the phone (192.168.1.100) into the address bar and input password of
the phone into the following page.
From version 1.24, there are two passwords for the IP phone: ordinary password and super password. Default
password 1234 is ordinary password and super password is 19750407 (the super pin for some PINGHE phone is not
19750407, please ask for the provider of the IP phone). With Debug set 0[disable], please input super password; while
Debug is not set as 0[disable], please input ordinary password. Then click button. The following configured pages will
popup.
