E-Tech VPPH01 Manual
9
Service type
: This option is used to accommodate the miscellaneous requirements of the system providers. When IP
phone is connected to these systems, please select the corresponding service type.
- Common: no special requirements
- etalk: Use eTalk prepaid card by selecting this item. With eTalk selected here, please
select dialnum in dial plan drop down list and then fill 00 into dial number field.
Note
When connected with Auvtech’s system, please select “auvtech” from the “nat traversal” list box, select
“account” from the “local type” list box.
- subcentrex: Use subcentrex servcie by selecting this item.
- ringtec: Use Ringtec service by selecting this item. With this service used, please select dialnum in use dial plan
drop down list and then fill account of Ringtec into dial number field.
- smartcon: Use smartcon service by selecting this item.
- dda: Use dda service by selecting this item.
- vida: Use Vida service by selecting this item.
- citron: Use citron service by selecting this item.
- asiasoft: Use asiasoft service by selecting this item
- Uptech: Use Uptech’s MGCP system
- Zte: Use Zte’s MGCP system
- Huawei: Use Huawei’s MGCP or H.323 system
- Kaimen: Use Kaimen’s MGCP system
- Voipack: Use Voipack’s MGCP system
- Lucent: Use Lucent’s H.323 system
- Harbor: Use Harbor’s MGCP system
- IPN: Use IPN’s H.323 system
- Yiyang: Use Yiyang’s H.323 system
- Thinker: Use Thinker’s H.323 system
- Suntek: Use Suntek’s H.323 system
- Sipphone: Free SIP service on internet.
- Inphonex: Free SIP service on internet
- Fwd: Free SIP service on internet
- Net2phone: Use Net2phone private protocol system.
- service addr, service id: Please put the URI (domain name/IP address : service port) of the server into “service
addr”. When the default service port is used, “: service port” can be omitted. “service id” is filled according to the
protocol used.
- H.323: If “use service” is checked, please put the URI of gatekeeper into “service addr” .The default service port is
1719. If the gatekeeper has a GKID, please put it into “service id”.
If “use service” is not checked, to make calls through gateway, please put the URI of the gateway into “service addr”.
To make IP-to-IP call, please clear this field. In both cases, the default service port is 1720.
- MGCP: Please put the URI of Call Agent into “service addr”. The default service port is 2727. Leave “service id”
empty.
- SIP: If “use service” is checked, please put the URI of the SIP proxy server into “service addr”. Put the domain name
of the SIP proxy server into “service id” or leave “service id” empty. If the system has an Outbound Proxy
¯
please put
the URI of the Outbound proxy into “service addr” and put the domain name of SIP proxy server into “service id”. The
default service port is 5060. If “use service” is not checked, please clear “service addr” and “service id”. Net2phone:
Please put the URI of the Net2phone server into “service addr”¨The default service port is 6801. Leave “service id”
empty. Net2phone usually use the following servers: call1.net2phone.com, call2.net2phone.com, kip1.net2phone.com,
skip2.net2phone.com, skip1.net2phone.net,skip2.net2phone.net.
nat traversal:
When the IP phone with private IP address need communicate with other IP phones in a different LAN
or on Internet, please select an item from dropdown list to set the proxy used by the phone.
-
disable:
Select this item when the log in server and IP phone in the same LAN, or the log in system supports the IP
phone working behind the LAN.
