CHECKING THE PIECE SLIDER
1.
Check:
piece slide
Damage/wear Replace
CHECKING THE DRIVEN PULLEY
1. Check:
face comp, driven
face comp, movable driven
Cracks/damage/wear Replace the face
comp, driven and face comp, movable
driven as a set.
2. Check:
torque cam groove
Damage/wear Replace the face
comp, driven and face comp, movable
3. Check:
guide pin
2
2
2
2
1
1
1
1
a
a
1
1
4. Measure:
spring driven face
Out of specification Replace.
Spring driven face free length
87.9 mm (3.46 in)
<Limit>: 82.6 mm (3.25 in)
5. Measure:
outer clutch internal diameter
Out of specification Replace.
Outer clutch internal diameter
107.0 ~ 107.2 mm (4.21 ~ 4.22 in)
<Limit>: 107.5 mm (4.23 in)
driven as a set.
Damage/wear Replace the face
comp, driven and face comp, movable
driven as a set.
ENG
4 - 39
BELT DRIVE
