Page 14 of 16
4. Straight and secure the stem quick release
5. Adjust the handlebar to a suitable height.
6. Adjust handlebar angle then fix the quick release
C
!
CAUTION
There is “Minimum Insertion” line marked on the
post of seat and handlebar and don’t pull to exceed
it.
7. Adjust the height of seat.
8. Centering the saddle, secure the quick-
release.
9. Reset the pedals.
! CAUTION
Thoroughly inspect again after assembly the
bicycle.
Copyright ©2008-2009 ETON America, all rights reserved.