Page 9 of 16
OPERATION
TO TURN ON THE POWER
1. Position ECO on flat road and stand on left hand side of the bicycle.
2. Turn the key switch to “ON” position
.
RIDING
1.
Push bicycle forward slightly and let kickstand bounce by spring.
2.
Riding on the saddle.
3.
Change power switch to position and make sure the power indicator is illuminated.
4.
Check road condition and stamp pedals for 2 rounds.
5.
Rotate the throttle grip, motor starts running.
★
Power will be cut off when apply front or rear brake. After releasing brake, pedal
again if bicycle’s speed is too slow to
1
make throttle grip having no function.
★
When power indicator flashes every 1 second, power remains for riding 4-6 km and it
will be cut off within short time if flashes every 1/8 second.
★
Keep charging battery whenever you are not riding.
RIDING POSTURE
For comfort, balancing, controlling and safety,
★ Keep head and eyes up, looking ahead, rather than at the ground.
★
Keep shoulders relaxed and back straight.
★
Bend elbows slightly and hold them away from body.
★
Always keep hands on the handlebars..
MAKE A STOP
1.Choosea flat ground.
2.Stand left side of the bicycle.
3. Steps on the kickstand bottom by right foot.
4.Pull bicycle, by both hands, backward and kick up the stand
.
！
WARNING
1. Under any circumstance, always apply rear brake first and then front brake.
2. Don’t speed up when riding on a downhill path
3. Pay more attention to road condition and obey traffic regulation.
Copyright ©2008-2009 ETON America, all rights reserved.
