2. Check:
Damage/wear → Replace the face comp,
driven and face comp, movable drive as a
3. Check:
4. Measure:
Out of specification → Replace.
Spring driven face free length
168.9 mm (6.65 in)
<Limit>: 164.0 mm (6.46 in)
<Limit>: 125.5 mm (4.94 in)
5. Measure:
Out of specification → Replace.
Outer clutch internal diameter
125 mm (4.92 in)
set.
Damage/wear → Replace the face comp,
driven and face comp, movable drive as a
set.
•
torque cam groove
•
guide pin
•
spring driven face
•
out clutch internal diameter
•
face movable drive
•
boss drive face
•
roller weights
•
roller weights
•
boss drive face
1
1
2
a
a
ASSEMBLING THE PRIMARY SHEAVE
1. Clean:
Use thinner to clean up grease, dirt on the pri-
mary sliding sheave cam side
.
2. Install:
1
2
3
4
1
2
3
4
1
2
1
2
ENG
BELT DRIVE
2
TIP
4 - 36
