CRANKCASE AND CRANKSHAFT
ENG
INSTALLING THE CRANKSHAFT
1. Install:
To avoid scratching the crankshaft and to
ease the installation procedure, lubricate the
oil seal lips with lithium-soap-based grease
and each bearing with engine oil.
Put the timing chain in parallel into the crank
case, then use hands to place the crank shaft
Ass’y into the crank case. Manually rotate the
crank shaft to check whether it is tightly engaged
with the timing chain. (if not, install again)
3
2
3
1
•
crankshaft
•
timing chain
•
crankshaft gasket
•
crankshaft
•
crankshaft
•
crankcase (right )
•
timing chain
•
knock pins
•
crankshaft assembly
ASSEMBLING THE CRANKCASE
1. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
2. Install:
(onto the crankcase mating surfaces)
3. Install:
Install the timing chain so it is not visible through
the opening
in the left crankcase
.
1
1
1
2
a
a
1
2
1
1
2
4. Install:
5. Tighten:
T
R
.
.
12 Nm (1.2 m
•
kg, 8.7 ft
•
Ib)
1
რ
NOTICE
TIP
TIP
4 - 48
