6 - 8
3. Measure:
• brake shoe lining thickness
Out of specification → Replace.
Measuring points
Replace the brake shoes as a set if either is
found to be worn to the wear limit.
Brake lining thickness
4.0 mm (0.16 in)
<Limit>: 1.5 mm (0.06 in)
CHECKING THE FRONT BRAKE DRUMS
The following procedure applies to each brake.
1. Measure:
• brake drum inside diameter
Out of specification → Replace.
Front brake drum inside diameter
Front: 110.5 mm (4.35 in)
<Limit>: 111.5 mm (4.39 in)
TIP
FRONT BRAKES
CHAS
a
a
a
a
2. Check:
• brake drum inner surface
Oil/scratches → Remove.
Oil
Use a rag soaked in
lacquer thinner or
solvent.
Scratches
Use an emery cloth (light
and even polishing).
INSTALLING THE FRONT BRAKES
The following procedure applies to both of the
front brakes.
Reverse the “Removal” procedure.
Note the following points.
1. Lubricate:
• brake camshaft
• pivot pin
Lithium-soap-based grease
