background image

Version 1.0.15 

49

 

Multiple APs 

Click Multiple APs to set up 4 different SSIDs to deploy a shared WLAN. Users can add 

or limit the properties for each SSID, increasing the flexibility and efficiency of the 

network.

 

 

(1.) 

Enable:

 check it for enable or not. 

(2.) 

Band:

 select the frequency from the drop down list. 

(3.) 

SSID:

 please enter different SSID in each class. 

(4.) 

Data Rate:

 please select the data transmission rate. 

(5.) 

Access:

 defined the access type. 

a. LAN+WAN:

 the client can access to the Internet and connect to 11N Mobile 

router’s GUI to setup.   

b. WAN:

 the client can only access to the Internet. 

(6.) 

Active Client List:

 display the properties of the client which is connecting 

successfully. 

(7.) 

Apply Changes:

 Please click 

Apply Changes

 to initiate or click 

Reset

 to cancel. 

4. 

 Network Type

 

Please select “

Infrastructure

” or “

Ad hoc

.” The default is “

Infrastructure

.” The selection is 

disabled when wireless mode is selected to AP.   

5. SSID

 

Please input your wireless network name. Default is “11N_Mini_Router”. 

Summary of Contents for BR080n



























































































Reviews: