Version 1.0.15
72
1.
Enable IP Filtering
Check enable or disable to apply IP Filter function.
2. Local
IP
Address
Please enter the IP address that needs to be filtered.
3. Protocol
Please select the protocol type of the IP address.
4. Comment
You can add comments for this regulation.
5.
Apply Changes & Reset
Click on
Apply Changes
to save the setting data. Or you may click on
Reset
to clear all the
input data.
6.
Current Filter Table
It will display all IP addresses that are filtering now.
7.
Delete Selected & Delete All
Click
Delete Selected
will delete the selected item. Click
Delete All
will delete all items in this
table.
8. Reset