OPERATION AND SERVICE INFORMATION
Page 1
Owner’s Guide
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings.
B
B
Thank you for purchasing this vehicle. Before driving the
vehicle, we ask you to spend some time reading this
Owner’s Guide. This guide contains the information that
will assist you in maintaining this highly reliable vehicle.
Some illustrations may show items that are optional for
your vehicle. This guide covers the operation of several
vehicles, therefore, some illustrations may not represent
your vehicle. Physical differences in controls will be il-
lustrated.
This vehicle has been designed and manufactured as a
‘World Vehicle’. Some countries have individual require-
ments to comply with their specifications; therefore,
some sections may not apply in your country.
Most of the service procedures in this guide can be ac-
complished using common automotive hand tools. Con-
tact your service representative on servicing the vehicle
in accordance with the Periodic Service Schedule.
Service Parts Manuals as well as Repair and Service
Manuals are available from a local Distributor, an autho-
rized Branch or the Service Parts Department. When
ordering parts or requesting information for your vehicle,
provide the vehicle model, serial number and manufac-
ture date code.
SERIAL NUMBER LOCATION
Three serial number and manufacture date code labels
are on the vehicle. One is placed on the steering column
(Ref. Fig. 1), the second is located on the frame mem-
ber under the front splash shield on the driver side (Ref.
Fig. 2) and the third is located on the passenger side
frame rail at the rear of the vehicle (Ref. Fig. 3).
In order to obtain correct components for the vehicle,
the manufacture date code, serial number and vehicle
model must be provided when ordering service parts.
Fig. 1 Serial Number Location on Steering Column
Fig. 2 Serial Number on Front Frame
Fig. 3 Serial Number on Rear Frame
BEFORE INITIAL USE
Read, understand and follow the safety label on the in-
strument panel. Be sure you understand how to operate
the vehicle and its equipment as well as how to use it
safely. Maintaining good performance depends to a
large extent on the operator.
Hydrogen gas is generated as a natural part of
the lead acid battery charging process. A 4%
concentration of hydrogen gas is explosive
and could cause severe injury or death. Charg-
ing must take place in an area that is ade-
quately ventilated (minimum of 5 air
exchanges per hour).
To reduce the chance of battery explosion that
could result in severe injury or death, never
smoke around or charge batteries in an area
that has open flame or electrical equipment
Serial Number
Serial Number
Serial Number
Summary of Contents for RXV Fleet Freedom Shuttle 2+2
