18
18
Endeavor
Owner’s Manual
SETUP
SECURE AUTO-SLIDER
®
PULL PIN
2
Auto-Slider
®
Pull Pin
Top of Frame Leg
Fabric Top Corner
A
Fold up the fabric top corner to expose the
Auto-Slider
®
Pull Pin.
B
Lift shelter corner slightly off the ground and engage the
Auto-
Slider
®
Pull Pin
by pushing up on the frame side trusses with one
hand while holding down the top of the frame leg with the other
hand. The pins will auto-engage when aligned with the holes on
the frame legs.
C
After the
Auto-Slider
®
Pull Pin
has locked into place, pull the
fabric top down over the frame leg, making sure to align and
secure the hook and loop strips on the fabric top to the frame.
D
Repeat on all remaining corners.
OM_Endeavor_0617.indd 18
6/30/2017 5:25:04 PM