background image

 
 
 
 
 
 

 
E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com 

www.e2s.com   DC-043_Issue_J (GNExPC6) - Page 2 of 2 - QAF_252_Issue_5

 

 
 
 

Martin Streetz 

Document No.: 

DC-043_Issue_J 

Quality Assurance Manager 

Date and Place of Issue: 

London, 23/12/2020 

EU Declaration of Conformity 

Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 

The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic 
equipment, including amendment by Directive 2015/863/EU.

 

Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) 

The product and all the components contained within it are free from substances of very high concern. 

Other Standards and Regulations 

EN 60529:1992+A2:2013 - Degrees of protection provided by enclosures (IP code) 

 enclosure rated IP66 

 

On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment 
conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. 
 
This Declaration is issued under the sole responsibility of the manufacturer.

 

Summary of Contents for GNExCP6B-BG











Reviews: