® 8k/4k CL Color
5
e2v semiconductors SAS 2014
1.3
Description
e2v’s next generation of line scan cameras are setting new, high standards for line rate and image quality. Thanks to
e2v’s recently developed multi-line CMOS technology, the camera provides an unmatched 100,000 lines/s and
combines high response with an extremely low noise level; this delivers high signal to noise ratio even when short
integration times are required or when illumination is limited. The 5μm pixel size is arranged in four active lines and
dual line filter configuration allowing the camera to be operated in several modes: True colour mode with 10μm RGB
pixels to provide equivalent colour fidelity to 10μm pixel tri-linear solutions with advanced immunity to web variation
or Full definition mode with a 8192 RGB pixel resolution.
1.4
Typical Applications
Raw material surface inspection
Flat panel display inspection
PCB inspection
Solar cell inspection
Parcel and postal sorting
High resolution document scanning
Print and paper inspection
Functionality (Programmable via GenICam Control Interface)
Analog Gain
Up to 12 (x4)
dB
Offset
-4096 to +4096
LSB
Trigger Mode
Timed (Free run) and triggered (Ext Trig, Ext ITC) modes
Sensor Modes
True Color Enhanced : 4096 RGB Pixels of 10x10µm
True Color Single : 4096 RGB Pixels of 10x10µm
Full Definition Enhanced : 8192 RGB Pixels 5x5µm
Full Definition Single : 8192 RGB Pixels 5x5µm
Mechanical and Electrical Interface
Size (w x h x l)
126 x 60 x 35
mm
Weight
360
g
Lens Mounts
F, T2, M42
-
Sensor alignment ( see chapter 4 )
±100
µm
Sensor flatness
±35
µm
Power supply
12 - 24
V
Power dissipation –
Typ. while grabbing
< 9
W
General Features
Operating temperature
0 to 55 (front face) or 70 (Internal)
°C
Storage temperature
-40 to 70
°C
Regulatory
CE, FCC and RoHS compliant
