1
THANK YOU FOR BUYING STELLAR
Thank you for buying a Stellar TWTA. This e2v technologies antenna mount
amplifier range provides RF power amplification at up to 180 W in the Ku-band. The
amplifier is:
*
Compact
*
Lightweight
*
Portable
7
can run off a wide range of mains input voltages and frequencies
*
Designed for high reliability.
Before using your new amplifier, we recommend that you spend a little time to read
this manual to familiarise yourself with its operation and features.
If you have any further questions, or recommendations about this manual, please
contact your distributor.
In addition to this manual your amplifier should be supplied with:
*
a mains connector plug,
*
a control connector plug,
*
test results,
*
an air inlet cowl,
*
6-32 UNC-2A x
1
/
2
-inch waveguide screws (4 off).
1.1
Range of Options
The N63xx series of antenna mount amplifiers includes the following variants and
options:
RF output power variants
120 W (N6312), 150 W (N6315) and 180 W (N6318)
RF system options
Product type numbers with a C suffix indicate that the unit is not fitted with an
integrated solid state preamplifier.
Product type numbers with a D suffix indicate that the unit is fitted with a digital
electronically variable attenuator.
Product type numbers with a UA or UB suffix indicate that the unit is fitted with
an integral L-band to Ku-band upconverter (see section 4.4 for upconverter
details).
Product type numbers with a W suffix indicate that the unit is capable of
operating over the wider bandwidth of 12.75 to 14.5 GHz.
HBN63xx-1, Issue 8, Page 6
