E5 51001, Instruction Manual

Thank you for choosing the Team Magic E5 4X4 Monster Truck.   The E5 4X4 Monster Truck  is designed to be fun to drive and usestop 
quality parts for performance and durability.  Before you start building your new R/C kit, we suggest you read though the instruction 
manual first.  Be sure to check all assembly and performance tips before you start.  We hope you enjoy the building processes.

General Building Tips:    

Read the instruction manual before building.
Clear a work area and try to work on a light color towel to avoid missing dropped parts.
Don't over-tighten fasteners.  Many assembly problems are caused by over-tightening screws or nuts.  Don't use too large a grip.  Please go slowly and 
feel the resistance build.  Just snug it up. 
When it doesn't fit, please double check.  If an assembly is not going together correctly, then either there really is a bad fit (e.g. a part is damaged or 
defective) or a mistake in assembly.  Always re-read the instructions when there are any problems.  If you cannot figure out what's wrong, always ask 
dealer, distributor or Team Magic.  Don't use force beyond what the instructions call for.
Using the right tools makes assembly much easier.  The instructions below finely indicate you what tools to get to make things easier.  We don't want to 
scare you by saying that all these tools are required, but you will have a easier time if you have them.  Borrow them from a friend to check if necessary.
The assembly is arranged so that you will open the bag and finish that bag before you go on to the next bag.  Sometimes, you will have parts 
remaining at the end of a bag.  These will become part of the following bags.

A Good Dealer Is Extremely Important!!

A good hobby dealer can help you with most assembly problems you might encounter. This is the main reason why you should buy your kits from a 
good dealer rather than from the cheapest dealer.  Bring your problematic parts to the dealer and, most likely, you'll walk away soon thereafter with 
the problem solved.  If you think that you really don't have the mechanical skills to complete the assembly, you may pay your dealer to finish the job for 
you.

!

Thank you for purchasing the E5 4X4 Monster Truck.  To drive the car, you will need to check the following procedures.

1

Included tools

Cross Wrench 

(4, 5, 5.5 & 7mm)

# 116043

(Please always buy these items in model shops)

AA Alkaline Or Rechargeable 

Batteries For Transmitter, 4pcs

Helpful equipments

3

Hobby Knife 

(Warning!!  This knife cuts 

nylon parts and fingers with 

equal ease. Be careful.)

TM Black HC Nut Driver 

5.5mm (for 3mm nut)
#117010 

TM Black RC Hex Wrench 

Metric Size 3.0mm
#117057-4

Needlenose Pliers

TM Black RC Hex Wrench 

Metric Size 2.5mm
#117057-3

Body Scissors 

(for body cutting)

#116006

TM Black RC Hex Wrench 

Metric Size 1.5mm 
#117057-1

TM Black RC Hex Wrench 

Metric Size 2.0mm
#117057-2

Required items

2

7.4v / 11.1v Rechargeable

Battery Pack X 1

Battery Pack charger

Circlip Plier
#117032

1/10 4X4 MONSTER Truck

1

Water Warning

After vehicle gets wet, please unplug the ESC from the battery
to avoid putting users in danger. Also, rust proofing the
bearings and metal parts is highly recommended.

If you feel driving in water is necessary, please seal holes in
the tires and rims before performing this action to prevent the
tire foam from absorbing water inside the tiers.