3534-MANUL-V01.00.03 HFCT1 Operating Manual
12 August 2021
Page 4 of 10
3.
Maintenance
Calibration
No regular maintenance or calibration is required for the HFCT.
Cleaning and Storage
The HFCT should be stored in clean and dry conditions. If cleaning is deemed necessary, it is advised to
disconnect the HFCT as per 2.1.2 and clean with a damp cloth (do not use harsh chemicals) with the HFCT
closed shut. No attempt to gain access to the internal circuitry should be made. If any doubt exists, contact the
manufacturer. The HFCT can become damaged by dropping and care should be taken to ensure the HFCT is
secured and handled correctly. The core of the HFCT can fracture internally without visible effects, if damage
is suspected due to an impact, contact the manufacturer.
Waste electrical and electronic equipment directive (WEEE)
EA Technology is a member of an approved compliance scheme as defined by the WEEE directive. When an
EA Technology product reaches the end of its operational life, it must be recycled by a licensed waste
management operator or returned to EA Technology for recycling.
