44
Press ENT to move the cursor, press UP/DOWN to select a number for a
digit selected, and press ENT to confirm the setup after the last digit has
been set up. Press ESC to return to previous menu.
6.2.5.11 Factory Reset
This function is designed to restore factory defaults.
6.2.5.12 Adjust Total E
The total energy generated may be cleared or changed after maintenance
or translocation, and the previous data can be restored with this function.
The total energy generated can be adjusted here.
6.2.5.13 Reset Total E
The total energy generated record can be cleared here, and after clearing,
the energy generation record will be zero.
Press ENT to clear the energy generation history and press ESC to cancel
the previous operation.
6.2.5.14 Export On/Off
This function is to control the grid connection or disconnection of
inverters.
Press UP/DOWN to scroll the menu, press ENT to perform the selection,
Password:
1000
Confirm:
1000
YES=ENT
EXIT=ESC
Are You Sure ?
TOTAL
ENERGY
5700000 KWh
YES=ENT
EXIT=ESC
Are You Sure?
Inverter
ON/OFF
ON
