Aircraft status indicator
Battery is low “ ” ; the aircraft will return when
the altitude is over 15m or the distance is over
15m; if either the flying altitude or flying distance
is less than 15m, the aircraft will land to the spot.
Battery is running out “ ”; the aircraft will return
when the altitude is over 100m or the distance is
over 300m.
Battery legend “ ” on LCD display is as
shown, with steady long beep sound.
Battery legend “ ” on LCD display is as
shown, with steady “beep beep beep...beep
beep beep” sound.
No.
1
2
3
4
5
Remote controller status
Signal strength indicator changes circularly
from weak to strong.
Signal strength on LCD display is less
than two grids or no displaying, with
steady long beep sound.
The remote controller is under signal connection
status.
The remote controller is in low voltage status.
Please change a full charged battery.
1. The distance between aircraft and remote
controller is so long that the signal is weak.
2. The battery is removed after the aircraft
connects to the remote controller.
Description
Indicator lights flash slowly with steady
“beep beep... beep beep” sound and the
battery legend “ ” on LCD display flashing.
LCD Screen display
Remote controller
battery level
GPS mode
Satellite
amount
Altitude against
Home Point
Photo/
Video
Return to Home
(RTH) icon
Aircraft battery
level
Remote controller
throttle mode
Distance against
Home Point
Signal strength
High/Low speed
mode
-15-
EX3 User Manual