!
!
!
Note: The best distance between the ground and the drone should be more than 1 meter during calibration.
●Do not perform compass calibration in areas with strong magnetic fields, such as magnetite, parking lot, building area,
electric tower, etc.
●During calibration, please do not carry ferromagnetic materials with you, such as keys or mobile phones.
●Do not perform compass calibration near bulk metal.
Search satellite signals
:After the compass calibration procedure is completed,
put the drone on the flat ground, the drone will automatically search for the
satellite signal, the rear indicator light of the drone will change from slow flashing
to steady light and the remote control beeps, then the search satellite signal
procedure is completed. Unlock the drone by pushing the left joystick to left
45°and the right joystick to the right 45°at the same time(as the picture is shown),
the motors will spin, then push the throttle stick up, the drone will take off.
then the search satellite signal procedure is completed. Unlock the drone by
pushing the left joystick to left 45°and the right joystick to the right 45°at the same
time(as the picture is shown), the motors will spin, then push the throttle stick up,
the drone will take off.
Tips: Please make sure that the drone flies in wide-open space and the satellite signal is more than 7 stars show in the app
before take-off
Application installation instructions
Tips:
Step 1: Please scan the QR code below
to download the App name EACHINE PRO.
Warning
：
Your mobile phone Wi-Fi require support
IEEE 802.11a/b/g/n/ac, which is 5G band WLAN
Step 2: Connect the drone with your mobile device
follow the steps below
①
Turn on the drone.
②
Go to WLAN setting in your mobile device and
search the wifi name:
WiFi-5G4K-GPS -EX5-XXXXXX
③
Connect the mobile device with the drone via wifi.
④
Launch the EACHINE PRO app, the you can
control the drone from your mobile device
Recommended mobile device models and configurations
IOS system
Android system
model and
configuration
Recommended model
Best model
model and
configuration
Operating
system version
CPU model
RAM
CPU usage
Recommended model
Best model
Product type
Operating
system version
iPhone 6 and newer models
IOS 8.0 and newer system
IOS 9.0 and newer system
iPhone 7 and newer models
Snapdragon 630 and newer
models
Samsung Exynos 7420 and
newer models
Helio X25 and newer models
Kirin 950 and newer models
Snapdragon 835 and newer
models
Samsung Exynos 8895 and
newer models
Helio 970 and newer models
Kirin 970 and newer models
Android 5.0 and newer models
3G and above
CPU usage 25% and below
CPU usage 10% and below
6G and above
Android 8.0 and newer models
Only one mobile device is allowed to connect to a drone via wifi at a time
Note: When the drone is flying in the following environment,the optical flow
positioning function of the bottom camera is not good, resulting in unstable hovering
and the drone is difficult to fly smoothly, and even the drone drifting.
On the water
Dim light
Large gap
between high
and low
Smooth
reflective
ground
Two-tone
stripes
When the drone is flying
indoors and cannot receive
satellite signals, the drone
will automatically turn on
the optical flow mode.
When the drone is flying
outdoors and can receive
satellite signals, the drone
turns on the GPS mode.
-6-
Summary of Contents for EX5
Page 1: ......
