TYRO69
- 6 -
2
Start grouping and channel configuration
Under the OSD MAIN menu, the PITCH rocker can move the cursor
arrow up and down to select the menu item, select the FEATURES item,
then select the ROLL rocker to the right, and enter the lower
configuration menu (Fig. 4).
Figure 5
FEATURES Menu
In the menu of Figure 4, select the desired frequency grouping
BAND and channel CHAN by swinging the ROLL rocker left and right.
Note:
Because VTX1 supports 48 channels, users can select any of
the 48 channels by pressing keys. But at present, Betaflight's OSD
parametric function only supports 40 channels, so users can only
configure 40 channels on the OSD screen.
If the user chooses one of the eight channels that OSD parameters
do not support and enters OSD parameters, the system will
automatically change the user's original channel to A1 channel on our
frequency table (5865 Mhz), that is, the user can configure only 40
channels with OSD parameters.
After configuring the grouping and channel, you need to enter the
SET item and select YSE to take effect (Figure 6).
