6.0 Switchable VTX
7.0 Pagoda Antenna
Frequency control method:
Button frequency control (1-8): press the button for 2 seconds
to enter the frequency setting, and press the button to change
the frequency CH1-8.Change the frequency band (A-E), set the
frequency, press the button for 2 seconds, then press the button
to change the frequency group FR (A-E).
Gain: 5dBi
Max. Power: 50w
Connector: RP-SMA
Color: Black
Weight: 8.6g
Length: 78±3mm
Max. Dia.: 22.4±1mm
Min. Dia.: 11.8±1mm
Frequency: 5.8G
Impedance: 50
Ω
VSWR: <1.5:1
Polarization: Circular Polarized
Radiation: Omni
Features :
Omni-directional, no dead corner
High gain, more stable.
Less flash, stonger siginal
Points for attention:
The antenna is installed at the output terminal before power up,
so as not to damage internal components.Note that the input
voltage is within the specified range and is positive or negative,
so as not to damage internal components.If the antenna is replaced,
choose a standing wave and a good gain antenna to obtain a longer
transmission distance.Attention should be paid to electrostatic
protection during transportation and installation.
TYRO99
QUICK START GUIDE
-7-
