Maintenance
This d
t and its contents are the property of CASSIDIAN
nd must not be copied or circul
7
1
2
3
4
5
REPLACING A PRIMARY DC CONVERTOR POWER SUPPLY CABLE FUSE
REMOVAL
• Locate the fuse (see Table 4.1).
• Remove the fuse (see Figure 4.6, item 2 or 5) from the fuse holder (item 3 or 4) located
on the power supply cable (item 1).
INSTALLATION
• Check that the technical state of the new fuse is compatible with the old one
(see Section 1.3, Document [4]).
• Insert the fuse (item 2 or 5) into the fuse-holder (item 3 or 4).
SHEET E-2
Figure 4.6
REPLACING A PRIMARY DC CONVERTOR POWER SUPPLY CABLE FUSE
IDR-
IDO
_M
C
9_CA
B
LE
AL
IMDC_F
U
S
_01_
01