Description
This d
t and its contents are the property of CASSIDIAN
nd must not be copied or circul
1
2
3
4
5
2.2.2.5
Primary mains convertor
The front panel of the primary mains covertor (item 1) comprises:
• 1 connector (item 6) for the power supply cable,
• 1 extraction handle (item 2),
• 1 “I/O” switch (item 7),
• 1 “DC” supervision LED (item 3),
• 1 “AC” supervision LED (item 4),
• 1 convertor locking screw (item 8),
• air vents (item 5) for the ventilation.
The rear panel comprises 1 24-pin Molex connector (item 9) to supply the sub-assemblies
inside the rack.
The primary mains convertor (see Plate 6.III, item 2) is secured to the front panel outside
the rack with a locking screw (item 4).
