Installation, Operation and Parts Manual
EE-6435V2.S/EE-6435V2.B
8
RISK OF CRUSHING (PERSONNEL)
When the platforms and the vehicle are lowering personnel are prohibited from entering the area beneath the movable parts of the lift (Fig.4).
The lift operator must not start the lift until it has been clearly established that there are no persons in danger zone (Fig 1, 4, 5)
(Fig. 4) (Fig.5)
RISK OF IMPACT
Caused by the parts of the lift or the vehicle that are positioned at head height.
When, due to operational reasons, the lift is stopped at relatively low elevations(less than 1.75 m from the ground) personnel must be careful
to avoid impact with parts of the machine not marked with special colors. (Fig.6)
RISK OF VEHICLE MOVING
Caused by operations involving the application of force sufficient to displace the vehicle.
In the case of large or particularly heavy vehicles, sudden movement could create an unacceptable overload or uneven load sharing. Therefore,
before lifting the vehicle and during all operations on the vehicle
MAKE SURE THAT IT IS PROPERLY STOPPED BY THE HAND BRAKE.
(Fig.6) (Fig.7)
RISK OF VEHICLE FALLING FROM LIFT
This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, incorrect stopping of the vehicle, or in the case of
vehicles of dimensions that are not compatible with the capacity of the lift.
Summary of Contents for EE-6435V2.B
