Assembly Instructions For Z-Scale
Ford Model BB-157 1 ½ ton Trucks
Page 1
This is a scale model kit of the 1934 BB series truck. The BB series was in production
from 1932 to 1934. It was equipped with either the standard four cylinder or the optional
“flathead” V-8 (this kit depicts the V-8). The BB-157 indicates the longer wheelbase version
(157”) rather than the shorter wheelbase version (131.5”). The kit is available with several
different cargo beds and loads, this first sheet of instructions is common and the second sheet
is specific to the type of bed/load, such as stake bed with beer kegs or flat bed with lumber,
etc..
Parts Included in the kit:
A. 3D printed chassis.
B. 3D printed cab
C. 3D printed cargo bed
E. 3D printed load - on some versions of the kit
D. One decal sheet
Required to complete the kit:
Paint - Flat black, silver, brown, wood, gloss coat
- and cab color (see page 4 for painting guide).
Glue - Slow setting CA is best.
Tools Required:
1. X-acto knife with a sharp #11 blade.
2. #400 and #600 sandpaper.
www.eaelec.com
Made in Canada
WARNING: CHOKING HAZARD
Keep out of reach of small
children!
Note that these ARE NOT TOYS,
AND ARE NOT INTENDED FOR
USE BY CHILDREN UNDER
AGE OF 14. These products are
model railroad equipment and
accessories intended for use by
adults.
ROYCE
LUMBER
R
Panther
BREWERY
CO.
Beer Truck
Lumber Truck
