59
11.2 Move Files
The way of move files is similar to copy file, please refer to 11.1 copy files. Press the ctrl
key on the remote controller and select cut to the next step. After executing move files, the
file will does not exist in the source device, but displayed in the designation device.
11.3 Delete Files
Select the files which you want to delete and press the left key to choose.
After select was completed, press the ctrl key on the remote controller and select the
delete to next step.
You can also press the delete key on the remote control to delete the
selected files.
11.4 Rename the file
Select the file which you want to rename and press the ctrl key on the remote controller
and select rename to next step. Enter a new name and press ok to change it.
11.5 Select and Cancel Select the Files
If you want to select all the files, press the ctrl key on the remote controller and select all
option, all files in the directory will be selected.
As the same way, press the ctrl key on the remote controller and select cancel all, the
file which you selected will be canceled.
As the prompt, you can also use the left key to select or cancel select the files.
12. DTV (optional)
Need an external USB DVBT tuner
(optional), then connect it to the player, press the
left and right key on the remote controller and select DTV to access to.
13. Upgrade Firmware
Through Settings-System-Upgrade software to enter into the update firmware interface,
you can select from update through internet or update through USB.
Use the Internet to upgrade, please ensure that the player is connected to the Internet.
The following step is the way to update through USB.
Step 1: connect USB device with update package to the player (the USB devices only
support for FAT32 and FAT16 formats), and ensure that the device has been detected by
the player.
Step 2: through setting-system-update software-update through USB. Press ok key and
select yes to update the firmware.
The whole installation will last for approximately 2 minutes; please wait for it patiently.
Remarks:
Never disconnect the power supply during installation;
Never unplug the external storage devices during installation.