4810 Clover Road • Greensboro, NC 27450 • 1-800-336-2776 • www.eagleequip.com • © Eagle Equipment 2018.01 • page 8
IMPORTANT SAFETY INSTRUCTIONS
READ THESE SAFETY INSTRUCTIONS THOROUGHLY
1. Read and understand all operation and safety warning procedures before operating the equipment.
2. Keep hands and feet clear. Remove hands and feet from any moving parts. Avoid pinch points.
3. Keep work area clean. Cluttered work areas invite injuries. Consider work area environment. Do
not expose equipment to rain. Do not use in damp or wet locations. Keep area well lit.
4. Only trained personnel should operate this equipment. All non-trained personnel should be kept
away from the work area. Never let non-trained personnel come in contact with or operate
the equipment.
5. Use the equipment correctly. Eagle Equipment is not liable for any damage or injury caused by
failure to comply with these regulations.
6. Remain clear of equipment when in operation. Clear area if danger is present.
7. Non-skid, steel-toe foot-wear and safety glasses is recommended when operating equipment.
8. DANGER: Disconnect power at the receptacle before performing any electrical repairs. Secure plug
so that it cannot be accidentally plugged in during service.
9. WARNING: Risk of explosion. This equipment has internal arcing or sparking parts which should not
be exposed to flammable vapors. This machine should not be located in a recessed area or below
floor level.
10. Maintain with care. Keep equipment clean for better and safer performance. Follow manual for
proper instructions. Keep controls clean and free from grease and oil. Protect all parts of the
electrical equipment from humidity and moisture.
11. Carefully inspect the equipment on a regular basis. Perform maintenance according to the
maintenance schedule.
12. Check for damaged parts. Check alignment of moving parts, breakage of parts or any condition
that may affect its operation. Do not use equipment if any component is broken or damaged.
13. Never remove safety-related components from the equipment. Do not use the equipment if safety
related components are damaged or missing.
14. Failure to use the machine in its intended state voids the manufacturer’s warranty. Eagle
Equipment offers a one-year parts warranty.
15. Stay alert. Watch what you are doing. Use common sense. Be aware.
