16
5.5 Real-time data
(1) Real-time interface:
In the loading process, click
[Online]
menu
option immediately
or click directly on the icon on the toolbar. You can use this window to view real-time
information during a test. Click the middle of the label; you can switch the display to voltage,
current, power, frequency, or power factor curve.
(2) Save Data:
Before starting loading, the user can set up to save the forthcoming test.
Choose the appropriate "interval", then press
[Save Real Data]
to the right of the Real
Data window shown, the button changes to
[Stop Save]
, and the program will start
saving this real-time data of the test. After the test is complete, click
[Stop Save]
to stop
and save the test data stored within this period. Then from the
[File]
menu select
[Open
Test Data]
in the test record to view previously saved historical data.
5.6 Test records
(1) Open Test Data:
Click the
[File]
menu, then click the drop-down menu and select
[Open Test Data]
or click the icon on the toolbar, the following window appears. Test
data is stored in this interface; you can open any one existing test record and view a
variety of graphs and reports for the test.
