33
Eagle Eye Power Solutions, LLC | 877-805-3377 | www.eepowersolutions.com
Section 4. Web Server Interface
4.18 Menu Items: History Log- Data Log
The
Data Log
lists measured data for all listed category items, including:
•
AC Volt(R) -
AC Input voltage (V) measured at AC terminal block (R) position; for Single Phase
•
AC Volt(S) -
AC Input voltage (V) measured at AC terminal block (S) position; for 3-Phase only
•
AC Volt(T) -
AC Input voltage (V) measured at AC terminal block (T) position; for 3-Phase only
•
DC Volt
-
DC Output Voltage measured on the Shelf’s output DC
bus
•
Load Current -
DC Output Current measured on the Shelf’s output DC
bus
•
Batt Current -
Battery Current measured in-line with the Battery feed cables, within the Shelf
•
Rack Temp -
Rack ambient temperature measured at Shelf front near the Rectifier Modules
•
Batt Temp1 -
Battery (1) ambient temperature near the battery string (if equipped)
•
Batt Temp2 -
Battery (1) ambient temperature near the battery string (if equipped)
•
Unit1 Current
-DC Output Current (A) measured at Rectifier Module #1 output
•
Unit2 Current -
DC Output Current (A) measured at Rectifier Module #2 output
•
Unit3 Current -
DC Output Current (A) measured at Rectifier Module #3 output
The
Data Log Period
setting in the
Configuration-Operate Setting
page determines how often the
Data Log measured data is captured (1 minute, 10 minutes, 30 minutes, or every hour)
Figure 15a. History Log- Data Log page
