PV922 | ENGLISH USER MANUAL
11
Start Recording
①
Power on the main set, match the frequency of main set and camera in wireless
recording mode, or check the camera connection in wire recording mode.
②
Switch the function knob to function setting, to set recording mode.
Press button to start recording, top left corner on screen will show
recording ico.
③
Press button to stop recording, recording ico will disappear.
④
In preview mode, press button can take photo.
Once-Operation recording mode:
Continuous recording and storage the video per 30
minutes;
Motion recording mode
：
It will continuous recording if movement sensed, 30 minutes
longest for each part, if movement is not sensed, recording
will stop after 15 Secs.
Timing recording mode
：
Start recording according to the time you setted, 30 minutes of
each video file.
Audio recording mode:
The audio file will not storage in partial.
Attention
：
The mein unit has the vibrate notice while low power and no video signal.
1.While the camera did not connect with the main unit correctly, the main unit will
vibrate because of no signal, please check the connection carefully.
2.While the power is not enough, the main unit will continuous vibrate 3 times, at
the same time stop recording.
